https://www.de.onkyo.com/de/irajax/de/faq-395.html/cHJvamVjdC5jb21tb24udXJsU2hvcnRlbmVyOw==

FAQ Service

How do I use the bi-amping feature of my receiver?

What do we mean by Bi-amping ?

This basically means using 2 amplifiers to drive one speaker, one for the LF(low frequency) and one for the HF (High frequency).

Requirement for bi-amping operation is that the speakers are designed for bi-wiring and have the appropriate connection. This is normally two sets of binding post’s on the back of the speaker, one for the LF & one for the HF (MAKE SURE YOU REMOVE THE SHORTING LINKS ON THE SPEAKERS).

When the AVR is in bi-amping mode it will send the full range signal over both sets of terminals on the AVR to the speaker, now make sure that one pair ( red+ & black-) goes to the LF and one other to the HF.

Categories for this entry

Tags: -

Related entries: -

Last update:
2012-05-05 18:21

Author:

Revision:
1.0

/faq/index.php?sid=8822794&lang=en&action=savevoting {votingAjaxOptions} 462 not helpful helpful Rate this FAQ

Thank you for your opinion!

Your vote could not be counted.

Records in this category