FAQ Service

Firmware update failed - receiver reports an error.

After setting up the new firmware to the receiver reports an error. The device can not operate anymore.

In this case, it is typically difficult to proceed - as the receiver might not allow to do any other firmware update.

You should contact to one of our service centers, which have other means to update the firmware directly.

The list of our authorized service centers can be found on our website in the Support section.

Categories for this entry

Tags: TX-NR1009, TX-NR1010, TX-NR3009, TX-NR3010, TX-NR414, TX-NR5009, TX-NR5010, TX-NR509, TX-NR515, TX-NR525, TX-NR579, TX-NR609, TX-NR616, TX-NR626, TX-NR709, TX-NR717, TX-NR727, TX-NR809, TX-NR818, TX-NR828, TX-NR929, TX-SR309, TX-SR313

Related entries: -

Last update:
2013-07-15 10:16



/faq/index.php?sid=8855996&lang=en&action=savevoting {votingAjaxOptions} 419 not helpful helpful Rate this FAQ

Thank you for your opinion!

Your vote could not be counted.

Records in this category